FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
CLI Commands
2-177
show
show.port.technology
Syntax technology
Purpose This command displays port technology information for all ports.
Parameters This command has no parameters.
Command Example
Root> show port technology
Output The port technology data is displayed as a table that includes the
following properties.
Output Example The output from the show.port.technology command displays as
follows.
Port Connectr Transcvr Distance Media
---- -------- --------- ------------ -----------
0 LC Long LC Long M-M 50um
1 LC Long LC Long M-M 50um
2 LC Long LC Long M-M 50um
3 MT_RJ Long LC Long M-M 50um
4 MT_RJ Long LC Long M-M 50um
5 MT_RJ Long LC Long M-M 50um
6 LC Long LC Long M-M 50um
7 LC Long LC Long M-M 50um
8 LC Long LC Long M-M 50um
9 LC Long LC Long M-M 50um
10 LC Long LC Long M-M 50um
11 LC Long LC Long M-M 50um
12 LC Long LC Long M-M 50um
13 LC Long LC Long M-M 50um
14 LC Long LC Long M-M 50um
15 LC Long LC Long M-M 50um
Port The port number.
Connectr The port connector type (LC, MT_RJ, MU,
Internal).
Transcvr The transceiver type (Long LC, Short, Short
OFC, Long LL, Long Dist).
Distance The distances supported (Short, Intermediate,
Long, Very Long).
Media The media type (M-M 62.5um, M-M 50um,
M-M 50,62.5um, S-M 9um, Copper).