FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
2-180
Enterprise Operating System Command Line Interface User Manual
show
sourcePort set to all
Root> show preferredPath showPath 1 all
Preferred Path State: Enabled
Source Port Preferred Exit Port Actual Exit Port
------------------ ------------------- ----------------
0 2 No Source
2 5 5
3 17 No Path
22 5 6
show.security.fabricBinding
Syntax fabricBinding
Purpose This command displays the fabric binding configuration saved on the
fabric. The command performs the same function as
config.security.fabricBinding.showActive.
Parameters This command has no parameters.
Command Example
Root> show security fabricBinding
Output The fabric binding configuration data is displayed as a table that
includes the following properties.
Output Example The output from the show.security.fabricBinding command displays
as follows.
Domain 1 (20:30:40:50:60:70:8F:1A) (Local)
Domain 3 (00:11:22:33:44:55:66:77) (Unattached)
Domain 2 (88:99:AA:BB:CC:DD:EE:FF) (Attached)
Domain 14 (11:55:35:45:24:78:98:FA) (Attached)
Domain ID The domain ID of the Fabric Binding
Membership List (FBML) member. Valid
domain ID's range from 1 to 239.
WWN The world wide name (WWN) of the FBML
member in colon-delimited hexadecimal
notation.
Attachment
Status
Indicates whether the FBML member is Local,
Attached, or Unattached. For more information,
see Fabric Binding Membership Terminology on
page 2-51.