FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
CLI Commands
2-191
show
Output Example The output from the show.thresholdAlerts.alerts command displays
as follows.
Name Type State
------------------------------------ ----------------- --------
Throughput Threshold #1 Rx Util Enable
Threshold for CRC CRC Errors Disabled
Safety #2 Logic Lnk Err Set Enabled
Safety #1 Cls2 BusiedFrms Disabled
Delimiter Errors CTA - Delimiter Errors
Address ID Errors CTA - Address ID Errors
Cls2 BusiedFrms CTA - Class 2 Busied
Frames
Cls2 RejectedFrms CTA - Class 2 Rejected
Frames
Cls3 DiscardFrms CTA - Class 3 Discarded
Frames
Phys Lnk Err Set CTA - Physical Link Errors
Summed Set
Lnk Seq Cnt Set CTA - Link Sequence
Counts Summed Set
Logic Lnk Err Set CTA - Logical Link Errors
Summed Set
LIPS Detected CTA - Loop Initialization
Primitives Detected
(Sphereon 4300 and 4500
only)
LIPS Generated CTA - Loop Initialization
Primitives Generated
(Sphereon 4300 and 4500
only)
State The enabled state of the CTA, either enabled or
disabled.