FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

A
A-2
Enterprise Operating System Command Line Interface User Manual
Message Error 009: Invalid Switch Description
Description The value entered for the switch DESCRIPTION is invalid.
Action The description for the director or switch may contain 0–255
characters. Enter a description with 0–255 characters and re-submit. If
spaces are used, enclose the description in quotation marks.
Message Error 010: Invalid Switch Location
Description The value entered for the switch location is invalid.
Action The location for the director or switch may contain 0–255 characters.
Enter a location with 0–255 characters and re-submit. If spaces are
used, enclose the location in quotation marks.
Message Error 011: Invalid Switch Contact
Description The value entered for the switch contact is invalid.
Action The contact for the director or switch may contain 0–255 characters.
Enter a contact with 0–255 characters and re-submit. If spaces are
used, enclose the contact in quotation marks.
Message Error 012: Invalid Port Address
Description The value entered for the port address is invalid.
Action Enter a valid port address.
Message Error 013: Invalid Port Number
Description The value entered for the port number is invalid.
Action Enter a port number within the range supported by your director or
switch.