FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

A
A-10
Enterprise Operating System Command Line Interface User Manual
Message Error 062: Invalid Zone Set Name
Description The value entered for the zone set name is invalid.
Action The zone set name must be contain 1–64 characters. The valid
character set for the zone name can be found in
config.zoning.renameZoneSet on page 2-91. Make the appropriate
changes to the zone set name and re-submit.
Message Error 064: Configuration changes have been limited to the API
interface
Description The API interface has restricted this interface from making
configuration changes.
Action To make configuration changes from this interface, the API interface
will need to update to allow this interface to make changes.
Message Error 065: Cannot remove the last CLI user with Administrator
rights
Description There has to be at least one CLI user with Administrator rights.
Action To remove this user, add another CLI Administrator and then delete
this user.
Message Error 068: The Switch IP Access Control List is Full
Description The list being activated has an invalid number of IP pairs
Action Make sure there is at least one IP address in the Access Control List
Message Error 069: Duplicate Port Name
Description Two or more port names are identical.
Action Port names must be unique. Make appropriate changes and
re-submit. For more information, see config.port.name on page 2-26.