FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

A
A-16
Enterprise Operating System Command Line Interface User Manual
Message Error 106: Invalid Threshold Scope
Description The scope of a threshold alert is not set to a valid state before the user
activates an alert.
Action Set the scope of the threshold alert, then try to activate the alert.
Message Error 107: Invalid Threshold State
Description The scope of a threshold alert must be set before the user activates an
alert.
Action Set the scope of the threshold alert, then try to activate the alert.
Message Error 108: Invalid TTA Type
Description The type of the throughput threshold alert has not been set.
Action Set the type of the TTA, then try to activate the alert.
Message Error 109: Invalid CTA Type
Description The type of the counter threshold alert has not been set.
Action Set the type of the CTA, then try to activate the alert.
Message Error 110: Invalid Percent Utilization
Description The type of the throughput threshold alert has not been set.
Action Set the type of the TTA, then try to activate the alert.
Message Error 111: Invalid Threshold Type
Description The type of the threshold alert is not valid.
Action Configure the type of the throughput threshold alert to one of the
types found in the enumerated table for TTAs.