FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

A
A-18
Enterprise Operating System Command Line Interface User Manual
Message Error 118: Invalid Port Speed
Description This request cannot be completed because the requested port speed is
not recognized for this product.
Action Port speeds may be set to 1 Gb/s or 2 Gb/s. Update the port speed
and re-submit the request.
Message Error 119: Switch Speed Not 2 Gb/sec
Description This request cannot be completed because the switch speed has not
been set to 2 Gb/s.
Action The switch speed must be set to 2 Gb/s in order to accommodate a
port speed of 2 Gb/s. Update the switch speed and re-submit the
request.
Message Error 121: Invalid Credit Starvation Threshold
Description An invalid credit starvation threshold has been entered.
Action Submit the request with a valid value. The credit starvation threshold
must be in the range 1-99.
Message Error 122: Invalid Port Congestion Threshold
Description An invalid port congestion threshold has been entered.
Action Submit the request with a valid value. The port congestion threshold
must be in the range 1-99.
Message Error 134: Invalid Membership List
Description Generic message to indicate a problem in either the switch binding or
fabric binding membership list.
Action Be sure that the membership list submitted does not isolate a switch
already in the fabric. If this is not the case, the user needs to be aware
of all fabric security rules and make sure that the list submitted
adheres appropriately.