FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

A
Error Messages
A-19
Message Error 135: Invalid Number of Fabric Membership List Entries
Description The number of fabric members submitted exceeds the maximum
allowable entries of 31.
Action The number of entries in the fabric membership list is limited to the
total number of domain IDs available to the fabric. Make sure that the
list (including the managed switch) contains no more than 31 entries.
Message Error 136: Invalid Number of Switch Binding Membership List
Entries
Description The number of switch members submitted exceeds the maximum
allowable entries of 256.
Action The number of entries in the Switch Binding Membership List is
limited to 256. Make sure that the list (including the managed switch)
contains no more than 256 entries.
Message Error 137: Invalid Fabric Binding State
Description The fabric binding state submitted is not recognized by the CLI.
Action The fabric binding state must be set to either “inactive” or “restrict.”
See config.security.fabricBinding on page 2-51 for clarification on these
states.
Message Error 138: Invalid Switch Binding State
Description The switch binding state submitted is not recognized by the CLI.
Action The switch binding state must be set to one of the following: disable,
erestrict, frestrict, or allrestrict. See config.security.switchBinding on
page 2-64 for clarification on these states.