FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

A
A-24
Enterprise Operating System Command Line Interface User Manual
Message Error 158: Invalid Switch IP Access Control List IP Address Range
Description The pair of IP addresses are invalid and cannot be added to the list.
Action Make sure the IP addresses are valid and the first IP is lower than the
second.
Message Error 159: Invalid IP Access Control List Pairs Count Value
Description The list being activated has an invalid number of IP pairs.
Action Make sure there is at least one IP address in the Access Control List.
Message Error 161: The Switch IP Access Control List is Empty
Description The management interface IP address is not in the list.
Action The management IP must be in the list or the current connection
would be lost.
Message Error 162: List is full
Description There is no more room for new entries in the list.
Action Remove a different entry and try again.
Message Error 163: FICON MS feature key must be installed
Description The command is not available without the FICON MS feature key.
Action Install the FICON MS feature key.
Message Error 164: FICON CUP Zoning feature key must be uninstalled
Description The operation cannot be completed with the FICON CUP Zoning key
installed.
Action Remove the FICON CUP Zoning feature key.