FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

A
Error Messages
A-33
Message Error 214: A Zone Contains Zero Members
Description You are attempting to activate a zone set that contains at least one
zone with zero members.
Action Each zone in the zone set must contain at least one member. Add a
valid member to the empty zone and re-submit.
Message Error 215: Zone Set Size Exceeded
Description The local work area zone set has outgrown the size limitations
imposed by the Command Line Interface.
Action Reduce the size of the zone set to meet CLI requirements. This can be
a reduction in the number of zones in the zone set, a reduction of
members in a zone, or a reduction of zone name lengths.
Message Error 216: No Attached Nodes Exist
Description There are no attached nodes.
Action To add more members, attach more devices to the switch or add the
members by WWN or Domain ID and port.
Message Error 217: All Attached Nodes are in the Zone
Description All the attached nodes are already in the zone.
Action To add more members, attach more devices to the switch or add the
members by WWN or Domain ID and port.
Message Error 218: Invalid Port Number
Description The value entered for the port number is invalid
Action Enter a port number within the range supported by your director or
switch.