FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

A
Error Messages
A-39
Message Error 245: Invalid increment value
Description The increment value specified is not between 1 and 70560.
Action Make sure the increment value given is between 1 and 70560.
Message Error 246: Invalid interval value
Description The interval value specified is not between 5 and 70560 minutes.
Action Make sure the increment value given is between 5 and 70560 minutes.
Message Error 247: Invalid counter number
Description The counter specified is not a valid number.
Action Use the table output by the command
perf.counterThreshAlerts.showStatisticsTable to find a valid counter
value.
Message Error 248: A counter must be assigned to this threshold alert
Description A counter must be assigned to an alert before it is enabled.
Action Use the perf.counterThreshAlerts.setCounter command to set a
counter before the alert is enabled.
Message Error 249: At least one port or port type must be added to this
threshold alert
Description A port or port type must be assigned to an alert before it is enabled.
Action Use the perf.counterThreshAlerts.addPort command to add a port
before the alert is enabled.