FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

A
Error Messages
A-41
Message Error 256: Invalid utilization type number
Description The utilization type number does not exist.
Action Select a valid utilization type number.
Message Error 257: Invalid utilization percentage value
Description The utilization percentage value is out of range.
Action Select a valid utilization percentage value.
Message Error 258: Invalid duration value
Description The duration value in minutes is out of range.
Action Select a valid duration value.
Message Error 259: Invalid threshold alert name
Description The name of the threshold alert is incorrect.
Action The threshold alert name does not exist.
Message Error 260: Not Allowed when SANtegrity feature is not installed on
remote switch
Description All switches in the fabric must have the SANtegrity feature key
installed.
Action Install the SANtegrity feature key on all switches in the fabric.
Message Error 261: No Attached Members Exist
Description There are no members attached to the switch.
Action Check all connections and make sure attached devices are present.