FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

A
A-42
Enterprise Operating System Command Line Interface User Manual
Message Error 262: All Attached Members are in the Membership List
Description All attached fabric members are already in the membership list.
Action This action is redundant, all members are already in the list.
Message Error 263: The SANtegrity Authentication feature key is not
installed
Description The SANtegrity Authentication feature key is not installed.
Action Install the SANtegrity Authentication feature key.
Message Error 264: The Preferred Path feature key is not installed
Description The preferred path feature key must be installed.
Action Install the preferred path feature key.
Message Error 265: Duplicate threshold alert name
Description The desired name for the threshold alert is already in use.
Action Use a different name for the threshold alert.
Message Error 266: Attached members cannot be added while fabric is
building
Description Attached members cannot be added while the fabric is building.
Action The fabric is still building, wait a couple of seconds until it is
complete.
Message Error 268: RADIUS key too long
Description The desired RADIUS key is too long.
Action Use a shorter RADIUS key.