FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

A
A-46
Enterprise Operating System Command Line Interface User Manual
Message Error 288: The NPIV feature key must be installed
Description The NPIV feature key must be installed to complete this operation.
Action Install the NPIV feature key.
Message Error 289: Duplicate policy name
Description A policy cannot be added if it has the same name as an existing
policy.
Action Select a different policy name.
Message Error 290: No Optic Installed
Description There is not an optic in the port for the specified port number.
Action Select a different port number, or plug in an optic.
Message Error 291: Port Inaccessible
Description There port in inaccessible for the given port number.
Action Select a different port number.
Message Error 292: Port Number out of Range
Description The specified port number if out of range for the given
switch/director.
Action Select a different port number.
Message Error 294: Invalid RADIUS Index
Description The specified RADIUS index is invalid.
Action Enter a valid RADIUS index. Valid indexes are 1 to 3.