FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

A
A-48
Enterprise Operating System Command Line Interface User Manual
Message Error 299: Chap secret not defined
Description The Chap secret must be defined (for Open Systems Management
Server before enabling Outgoing Authentication.)
Action Define a Chap Secret (for Open Systems Management Server).
Message Error 300: No user defined for this Interface
Description You cannot perform the specified action unless a user is defined for
the interface.
Action Create a user for the interface.
Message Error 301: RADIUS server undefined
Description You cannot perform the operation until a RADIUS server is
configured. (You cannot enable RADIUS Authentication if there is not
RADIUS server configured.)
Action Configure a RADIUS server (before enabling RADIUS
Authentication).
Message Error 302: Pending Default Zone Member Count Exceeds Threshold
Description You cannot enable default zoning if the there are more than 64
devices not being zoned.
Action Bring the number of unzoned devices down to 64.
Message Error 303: Invalid Preferred Path
Description The preferred path entered is invalid. (One reason the preferred path
could be invalid is if the destination domain ID is the same as the
local switch's.)
Action Enter a valid preferred path.