FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

1
Introduction
1-9
Entering Command Line Interface Commands
deletePortMem
renameZone
showPending
showActive
maint ---------- port ----------------------- beacon
reset
system ------------------ beacon
clearSysError
ipl
resetConfig
setOnlineState
perf ------------ class2
class3
clearStats
errors
link
openTrunking ---------- backPressure
congestionThresh
lowBBCreditThresh
setState
show
unresCongestion
preferredPath ---------- clearPath
setPath
setState
showPath
showState
thresholdAlerts -------- counter ------------------ addAlert
addPort
removePort
setCounter
setParams
show
showStatisticTable
deleteAlert
setState
Table 1-2 CLI Command Tree (Continued)