FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

i-3
Index
Index
view 2-142, 2-143
enable
access control list 2-63
OpenTrunking 2-107
SNMP agent 2-71
Enterprise Fabric Mode
activating 2-5, 2-6
deactivating 2-5, 2-6
error counters, port 2-102
error light, system, clearing 2-97
escape character 1-14
ethernet attributes 2-154
ethernet cable, replacing 1-22
ethernet connection, loss of 1-22
event log 2-144
exit port
set 2-111
F
F frames
configuring logging 2-140
F_port, setting 2-31
fabric address notification (FAN)
setting state 2-25
fabric binding
activate 2-53
active configuration 2-56
active FBML
show 2-56
add members 2-53, 2-54
deactivate 2-55
delete members 2-55
membership list 2-54
delete member 2-55
online state functions 2-52
pending configuration
activate 2-53
add attached members 2-53
pending FBML
show 2-57
replace pending 2-56
replace pending FBML 2-56
security 2-51
show 2-180
show pending 2-57
terms
attached 2-52
local 2-52
unattached 2-52
fabric binding membership list
active 2-56
add member 2-54
clear 2-54
deactivate 2-55
delete member 2-55
pending
show 2-57
replace pending FBML 2-56
fabric log
view 2-145, 2-146
fabric nodes
list 2-148
show 2-148
fabric topology
list 2-149
show 2-149
factory settings, resetting 2-95, 2-97
feature
Enterprise Fabric Mode 2-5, 2-6
FICON Management Server 2-6, 2-19
list 2-150
NPIV 2-8
Open Systems Management Server 2-8, 2-24
OpenTrunking 2-8, 2-107
SANtegrity 2-5, 2-6
show 2-150
feature keys 2-7
resetting 2-97
features
preferred path 2-110
fencing policies
show 2-150
Fibre Alliance MIB
SNMP 2-70
FICON CUP
show zoning 2-152
zoning 2-17, 2-18
FICON Management Server 2-6, 2-7, 2-19
FICON MS
show 2-152
ficonms 2-6, 2-19
FRU information 2-153