FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)
Table Of Contents
- Contents
- Preface
- Introduction
- CLI Commands
- Command Overview
- New and Changed Commands
- config
- config.enterpriseFabMode.setState
- config.features.enterpriseFabMode
- config.features.ficonMS
- config.features.installKey
- config.features.NPIV
- config.features.openSysMS
- config.features.openTrunking
- config.features.show
- config.fencing.addPolicy
- config.fencing.addPort
- config.fencing.deletePolicy
- config.fencing.removePort
- config.fencing.setParams
- config.fencing.setState
- config.fencing.show
- config.fencing.showTypeTable
- config.ficonCUPZoning.addControlHost
- config.ficonCUPZoning.deleteControlHost
- config.ficonCUPZoning.setState
- config.ficonCUPZoning.show
- config.ficonMS.setMIHPTO
- config.ficonMS.setState
- config.ficonMS.show
- config.ip.ethernet
- config.ip.lineSpeed
- config.ip.show
- config.NPIV.maxPortIDs
- config.NPIV.setState
- config.NPIV.show
- config.openSysMS.setHostCtrlState
- config.openSysMS.setState
- config.port.blocked
- config.port.fan
- config.port.name
- config.port.rxCredits
- config.port.show
- config.port.showPortAddr
- config.port.speed
- config.port.swapPortByAddr
- config.port.swapPortByNum
- config.port.type
- config.security
- config.security.authentication.interface api.outgoing
- config.security.authentication.interface.api.sequence
- config.security.authentication.interface.cli.sequence
- config.security.authentication.interface.eport.outgoing
- config.security.authentication.interface.eport.sequence
- config.security.authentication.interface.nport.outgoing
- config.security.authentication.interface.nport.sequence
- config.security.authentication.interface.osms.outgoing
- config.security.authentication.interface.osms.setKey
- config.security.authentication.interface.serial.enhancedAuth
- config.security.authentication.interface.show
- config.security.authentication.interface.web.sequence
- config.security.authentication.port.override
- config.security.authentication.port.show
- config.security.authentication.RADIUS.attempts
- config.security.authentication.RADIUS.deadtime
- config.security.authentication.RADIUS.deleteServer
- config.security.authentication.RADIUS.server
- config.security.authentication.RADIUS.show
- config.security.authentication.RADIUS.timeout
- config.security.authentication.switch.setSecret
- config.security.authentication.user
- config.security.authentication.user.add
- config.security.authentication.user.delete
- config.security.authentication.user.modify
- config.security.authentication.user.role
- config.security.authentication.user.show
- config.security.fabricBinding
- config.security.fabricBinding.activatePending
- config.security.fabricbinding.addAttachedMembers
- config.security.fabricBinding.addMember
- config.security.fabricBinding.clearMemList
- config.security.fabricbinding.deactivateFabBind
- config.security.fabricBinding.deleteMember
- config.security.fabricBinding.replacePending
- config.security.fabricBinding.showActive
- config.security.fabricBinding.showPending
- config.security.portBinding
- config.security.portBinding.bound
- config.security.portBinding.show
- config.security.portBinding.wwn
- config.security.ssh.resetKeys
- config.security.ssh.setState
- config.security.ssh.show
- config.security.switchAcl
- config.security.switchAcl.addRange
- config.security.switchAcl.deleteRange
- config.security.switchAcl.setState
- config.security.switchAcl.show
- config.security.switchBinding
- config.security.switchBinding.addMember
- config.security.switchBinding.deleteMember
- config.security.switchBinding.setState
- config.security.switchBinding.show
- config.snmp.addCommunity
- config.snmp.authTraps
- config.snmp.deleteCommunity
- config.snmp.setFaMibVersion
- config.snmp.setState
- config.snmp.show
- config.switch
- config.switch.domainRSCN
- config.switch.edTOV
- config.switch.insistDomainId
- config.switch.interopMode
- config.switch.ltdFabRSCN
- config.switch.prefDomainId
- config.switch.priority
- config.switch.raTOV
- config.switch.rerouteDelay
- config.switch.speed
- config.switch.show
- config.switch.zoneFlexPars
- config.switch.zoningRSCN
- config.system.contact
- config.system.date
- config.system.description
- config.system.location
- config.system.name
- config.system.show
- config.zoning
- config.zoning.activateZoneSet
- config.zoning.addPortMem
- config.zoning.addWwnMem
- config.zoning.addZone
- config.zoning.clearZone
- config.zoning.clearZoneSet
- config.zoning.deactivateZoneSet
- config.zoning.deletePortMem
- config.zoning.deleteWwnMem
- config.zoning.deleteZone
- config.zoning.renameZone
- config.zoning.renameZoneSet
- config.zoning.replaceZoneSet
- config.zoning.setDefZoneState
- config.zoning.showActive
- config.zoning.showPending
- maint
- perf
- perf.class2
- perf.class3
- perf.clearStats
- perf.errors
- perf.link
- perf.openTrunking.backPressure
- perf.openTrunking.congestionThresh
- perf.openTrunking.lowBBCreditThresh
- perf.openTrunking.setState
- perf.openTrunking.show
- perf.openTrunking.unresCongestion
- perf.preferredPath
- perf.preferredPath.clearPath
- perf.preferredPath.setPath
- perf.preferredPath.setState
- perf.preferredPath.showPath
- perf.preferredPath.showState
- perf.thresholdAlerts
- perf.thresholdAlerts.counter.addAlert
- perf.thresholdAlerts.counter.addPort
- perf.thresholdAlerts.counter.removePort
- perf.thresholdAlerts.counter.setCounter
- perf.thresholdAlerts.counter.setParams
- perf.thresholdAlerts.counter.show
- perf.threshholdAlerts.counter.showStatisticTable
- perf.thresholdAlerts.deleteAlert
- perf.thresholdAlerts.setState
- perf.thresholdAlerts.show
- perf.thresholdAlerts.throughput.addAlert
- perf.thresholdAlerts.throughput.addPort
- perf.thresholdAlerts.throughput.removePort
- perf.thresholdAlerts.throughput.setUtilType
- perf.thresholdAlerts.throughput.setUtilPercentage
- perf.thresholdAlerts.throughput.setParams
- perf.thresholdAlerts.throughput.show
- perf.thresholdAlerts.throughput.showUtilTypeTable
- perf.traffic
- show
- show.all
- show.auditLog
- show.epFrameLog.config
- show.epFrameLog.filterClassFFrames
- show.epFrameLog.setFilterPort
- show.epFrameLog.noWrap
- show.epFrameLog.wrap
- show.eventLog
- show.fabricLog.noWrap
- show.fabricLog.wrap
- show.fabric.nodes
- show.fabric.principal
- show.fabric.topology
- show.features
- show.fencing.policies
- show.ficonCUPZoning
- show.ficonMS
- show.frus
- show.ip.ethernet
- show.linkIncidentLog
- show.loginServer
- show.nameServer
- show.nameServerExt
- show.NPIV.config
- show.openSysMS.config
- show.openTrunking.config
- show.openTrunking.rerouteLog
- show.port.config
- show.port.exit
- show.port.info
- show.port.nodes
- show.port.opticEDD
- show.port.opticInfo
- show.port.profile
- show.port.showPortAddr
- show.port.status
- show.port.technology
- show.preferredPath.showPath
- show.security.fabricBinding
- show.security.log
- show.security.portBinding
- show.security.switchAcl
- show.security.switchBinding
- show.snmp
- show.switch
- show.system
- show.thresholdAlerts.alerts
- show.thresholdAlerts.log
- show.zoning
- Error Messages
- Commands and Corresponding Releases
- Glossary
- Index
Enterprise Operating System Command Line Interface User Manual
i-8
Index
delete member 2-66
online state functions 2-65
set state 2-66
show configuration 2-67
show SBML 2-68
Switch Binding Membership List 2-68
add member 2-65
delete member 2-66
overview 2-64
show 2-68
switches 2-98
configuring IP address 2-20
configuring IP line speed 2-21
configuring, set offline 2-72
e_d_tov 2-73
event log 2-144
FRU information 2-153
interoperability mode 2-74
IPL 2-97
login server database 2-155
name server database 2-156, 2-158
preferred domain ID 2-75
principal 2-76
priority 2-75
r_a_tov 2-76
rerouting delay 2-77
security log 2-181
showing LAN configuration 2-21
speed 2-78
system contact 2-81
system description 2-82
system location 2-83
system name 2-83
system attributes, displaying 2-188
system contact attribute 2-81
system date and time 2-82
system description 2-82
system error light, clearing 2-97
system location 2-83
system name 2-83
T
tabular output 1-17
technical support xvii
Telnet client session 1-2
connection, loss of 1-22
threshold alert
activate 2-127
add alert 2-120
add port 2-130
add throughput alert 2-129
alert list 2-189
counter
setting 2-123
deactivate 2-127
delete alert 2-127
disable 2-127
enable 2-127
list 2-189
log 2-192
name 2-125
parameters 2-124, 2-134
port
add 2-121, 2-130
remove 2-122, 2-131
remove port 2-131
set parameters 2-134
settings
show 2-135
show 2-127, 2-135
show utilization types 2-135
statistic table, show 2-126
throughput
add alert 2-129
trigger
percentage 2-133
trigger type 2-132
utilization percentage 2-133
utilization type 2-132
utilization types 2-135
threshold alerts
overview 2-116
summed sets 2-120
throughput alert
add 2-129
port 2-130, 2-131
set parameters 2-134
show settings 2-135
show utilization types 2-135
utilization percentage 2-133
utilization type 2-132
Throughput Threshold Alert
activating 2-117