FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

1
Introduction
1-17
Using the commaDelim Command
Using the commaDelim Command
Note that the output examples shown in the other sections of this
publication presume that commaDelim is off.
commaDelim
Syntax commaDelim enable
Purpose This command enables the user to obtain displayed information in
comma-delimited, rather than tabular, format. Tabular format is the
default.
Description This command can be entered at any point in the command tree.
Parameter This command has one parameter
Command Examples
Root> commaDelim true
Config> commaDelim 1
Config.Port> commaDelim false
Output Example Output displayed in commaDelim mode is as follows:
Root> show eventLog
Date/Time,Code,Severity,FRU,Event Data,
04/12/01 10:58A,375,Major,CTP-0,00010203 04050607 08090A0B 0C0D0E0F,
04/12/01 10:58A,375,Major,CTP-0,00010203 04050607 08090A0B 0C0D0E0F,
04/12/01 9:58A,385,Severe,CTP-0,00010203 04050607 08090A0B 0C0D0E0F,
04/11/01 7:18P,395,Severe,CTP-0,00010203 04050607 08090A0B 0C0D0E0F,
enable Specifies the comma-delineated state for
output. Valid values are true and false. Boolean 1
and 0 may be substituted as values.