FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
CLI Commands
2-7
config
NOTE: If the FICON Management Server is enabled, the default
management style is the FICON Management Style. The Open Systems
Management Style cannot be used.
Parameters This command has one parameter.
Command Example
Root> config features ficonMS 1
NOTE: The command config.ficonMS.setState on page 2-19 has functionality
that is identical to this command.
config.features.installKey
Syntax installKey featureKey
Purpose This command allows the user to install a feature set that is enabled
by the provided feature key. The switch can be either offline or online
when this command is executed.
NOTE: If any currently installed features are being removed by the new
feature key, the switch must be offline when the command is given.
Parameters This command has one parameter.
Command Example
Root> config features installKey AaBb-CCdD-eeFF-gH
ficonMSState Specifies whether the FICON Management
Server is enabled. Valid values are enable and
disable. Boolean 1 and 0 may be substituted as
values.
featureKey Specifies the key you have received to enable
optional software feature on a specific product.
A feature key is a string of case-sensitive,
alphanumeric ASCII characters.
The number of characters may vary in the
format; however, the key must be entered
exactly, including the hyphens. An example of a
feature key format is XxXx-XXxX-xxXX-xX.