FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
2-12
Enterprise Operating System Command Line Interface User Manual
config
Parameters This command has one parameter.
Command Example
Root> config fencing deletePolicy Policy1
config.fencing.removePort
Syntax removePort name portNumber
Purpose This command removes a port from the specified fencing policy.
Parameters This command has two parameters.
Command Example
Root> config fencing removePort 24
config.fencing.setParams
Syntax setParams name typeNumber limit period
Purpose This command sets the type, limit and period values for a specified
fencing policy.
name The name of the fencing policy. You can
also enter all for this argument. This will
delete all of the configured fencing
policies.
name The name of the fencing policy.
portNumber The new port number to remove from the
fencing policy, or all, which will remove
all of the individual ports from the
fencing policy.
0–11 for the Sphereon 4300
0–15 for the Sphereon 3016
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032
0–63 for the Intrepid 6064
0–127 and 132–143 for the Intrepid 6140