FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
2-14
Enterprise Operating System Command Line Interface User Manual
config
Command Example The meaning for each of these inputs can best be described using the
following example sentence:
If ports 0,1, or 2 have more than 5 protocol errors on a single port
within a period of 30 minutes, disable the offending port.
Where:
config.fencing.setState
Syntax setState name enabledState
Purpose This command sets the enabled state of the specified fencing policy. A
policy cannot be activated if it contains ports that are already
controlled by a different fencing policy of the same type.
Parameters This command has two parameters.
Command Example
Root> config fencing setState enable
config.fencing.show
Syntax show [name]
Purpose This command displays the settings for fencing policies.
Port list = 0, 1, 2
Fencing Type = Protocol Errors
Limit = 5
Period = 1800 seconds
name The name of the fencing policy.
enabledState Sets the fencing policy enabled state.
Valid values are enable and disable.
Boolean 1 and 0 values may also be
substituted.