FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
2-18
Enterprise Operating System Command Line Interface User Manual
config
Command Example Root> config ficonCUPZoning setState 1
config.ficonCUPZoning.show
Syntax show
Purpose This command displays the contents of the host control list and the
enabled state of FICON CUP Zoning.
Parameters This command has no parameters.
Command Example
Root> config ficonCUPZoning show
Output The data is displayed as a table that includes the following
information:
Output Example The output from the config ficonCUPZoning show command
displays as follows:
FICON CUP Zoning State: Enabled
Host Control List
-----------------------
01:02:03:04:05:06:07:08
09:0A:0B:0C:0D:0E:0F:00
NOTE: The command show.ficonCUPZoning on page 2-152 has functionality
that is identical to this command.
config.ficonMS.setMIHPTO
Synopsis setMIHPTO timeout
Purpose This command sets the Ficon MS MIHPTO value in seconds. The
default value is 180 seconds (3 minutes).
FICON CUP
Zoning State
The enabled state of the FICON CUP
Zoning feature
Host Control List List of 0-8 control hosts, displays
“empty” for control host list with no
members.