FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
2-20
Enterprise Operating System Command Line Interface User Manual
config
config.ficonMS.show
Syntax show
Purpose This command shows the Ficon MS settings
Parameters This command has no parameters.
Command Example
Root> config ficonMS show
Output The data is displayed as a table that includes the following
information:
Output Example The output from the config ficonMS show command displays as
follows:
Ficon MS State: Disabled
Ficon MIHPTO (seconds): 180
config.ip.ethernet
Syntax ethernet ipAddress gatewayAddress subnetMask
Purpose This command sets the Ethernet network settings.
ATTENTION! The Telnet connection can be lost when these Ethernet
network settings are changed.
NOTE: If the IP address is reconfigured, your Telnet client must be
reconnected to the new IP address. A new login will be requested.
Ficon MS State The state of the FICON MS feature.
Ficon MIHPTO The FICON MIHPTO value in seconds.