FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
2-48
Enterprise Operating System Command Line Interface User Manual
config
Purpose This command deletes an entry from the local authentication
database. Both the Web and CLI interfaces must have at least one
valid username with an “Administrator” role.
Parameters This command has one parameter:
Command Example
Root> config security authentication user delete
01:2A:3f:4:5:0:0
config.security.authentication.user.modify
Syntax modify username interface1 [interface2]
Purpose This command modifies an existing user in the local authentication
database. The user password and the combination of interfaces can be
modified with this command. After executing this command, you are
prompted to enter a password, similar to behavior of the user.add
command.
The role of a user will remain the same unless the currently assigned
role is invalid for the new combination of interfaces. If the role is no
longer valid for an interface combination, the role will be changed
back to “none”. At least one username with an “Administrator” role
must exist in the user database at all times for both the Web and CLI
interfaces.
NOTE: The SANtegrity Authentication feature key must be installed to
configure E port and N port usernames.
username A valid username in the local
authentication database.