FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
CLI Commands
2-49
config
Parameters This command has two required parameters, and an additional
password parameter at the prompt after the command:
NOTE: Currently the only possible combination of multiple interfaces is
(Web and CLI) or (E port or N port).
Command Example Root> config security authentication user modify
01:2A:3f:4:5:0:0 nport
config.security.authentication.user.role
Syntax role username privilegeLevel
username The existing user name whose fields will
be modified in the local authentication
database. If the entered user name does
not exist in the user database, an error
will be shown. This parameter can be
from 1-23 characters in length for an API,
Web or CLI username. E Port and N Port
usernames must be entered as a standard
colon delimited WWN. All characters in
the printable USASCII character set are
valid with the exception of spaces, single
quotes, and double quotes.
interfaces This is a list of interfaces that will be
assigned to the associated username.
Accepted values for this parameter are:
cli
web
api
eport
nport.
password Sets the password for the existing
username. This parameter can be from
1-24 characters in length for a Web or CLI
username. CHAP secrets must be exactly
16 bytes long for API, OSMS, E Port, and
N Port interfaces. This parameter will not
be echoed to the screen. See Passwords and
Secrets on page 1-14 for valid characters.