FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
2-50
Enterprise Operating System Command Line Interface User Manual
config
Purpose This command sets the role value that is associated to an existing
username. The role value can either be set to an administrator or an
operator. This value defaults to “none” when the user is first added to
the database. This value must be changed for all new CLI and Web
users before they will be allowed access to their respective interfaces.
Parameters This command has two required parameters:
Command Example
Root> config security authentication user role
01:2A:3f:4:5:0:0 administrator
config.security.authentication.user.show
Syntax show interface
Purpose This command displays a single interface from the local
authentication database.
Parameters This command has one optional parameter:
Command Example
Root> config security authentication user show web
Output Example The output for the config.security.authentication.user.show
command displays as follows:
Interface: Web
username A valid Web or CLI username in the local
authentication database.
privilegeLevel This parameter assigns the privilege level
to a username. Currently only Web and
CLI users can be assigned a role value.
This parameter must be either
administrator or operator.
interface The interface that will be displayed.
Accepted values for this parameter are:
cli
web
api
eport
nport.