FW 07.00.00/HAFM SW 08.06.00 McDATA SANpilot User Manual (620-000160-230, April 2005)

2
2-102
McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual
Installation Tasks
Task 22: Configure Open Trunking
This option is only available if the optional Open Trunking
feature is installed. Selecting this option opens the Configure Open
Trunking dialog box. For details on enabling Open Trunking and
configuring such parameters as congestion thresholds for ports,
event notification options, and the low BB credit threshold, refer
to Chapter 6, Optional Features in element manager user manual.
Task 23: Test Remote Notification (Optional)
If the call-home and e-mail notification features are enabled, set up
the SAN management application to test these remote notification
features. Because the features are configured at the SAN management
application, call-home and e-mail notification are enabled for
multiple switches or McDATA managed products. To test remote
notification:
1. Close the Hardware View for the switch and return to the Product
View by clicking the Close icon at the navigation control panel.
2. At the Product View, click Maintenance at the navigation control
panel and select Test Remote Notification from the Maintenance
menu. The Test Remote Notification dialog box displays.
Figure 2-83 Test Remote Notification Dialog Box
3. Select the Call Home and E-Mail check boxes to perform applicable
tests. The call home test dials the telephone number configured
while performing Task 11: Configure the Call-Home Feature
(Optional). The e-mail test sends a test message to e-mail
recipients configured while performing Task 19: Configure the
Sphereon 3032/3232 Element Manager Applications.