FW 07.00.00/HAFM SW 08.06.00 McDATA SANpilot User Manual (620-000160-230, April 2005)

2-106

McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual

Installation Tasks

NOTE: Do not simultaneously press the Ctrl, Alt, and Delete keys.

This action logs the user on to the browser-capable PC, not the

rack-mount management server.

f. Type the default Windows 2000 user name and password and

click OK. The management server’s Windows 2000 desktop

opens and the SAN management Login dialog box displays.

NOTE: The default Windows 2000 user name is Administrator and

the default password is password. The user name and password are

case-sensitive.

g. Type the SAN management default user name and password

and select an management server from the management server

drop-down list.

NOTE: The default SAN management user name is Administrator

and the default password is password. The user name and password

are case-sensitive.

h. Click Login. The SAN management application opens and the

Products View appears.

6. Remove the base EfcData restore CD from the CD-RW drive and

store the CD in a safe location. Insert a blank rewritable CD into

the CD-RW drive and format the CD. Refer to step 1 of this

procedure for formatting instructions.

7. Go to Task 26: Cable Fibre Channel Ports on page 2-134.

Task 25: Configure the Switch from the SANpilot Interface

(Optional)

If an management server is not available, use the SANpilot interface

to configure the Sphereon 3032/3232 Switch. Selectively perform the

following configuration tasks according to the customer’s installation

requirements:

• Configure switch ports.

• Configure the switch identification, date and time, operating

parameters, fabric parameters, and network addresses.