FW 07.00.00/HAFM SW 08.06.00 McDATA SANpilot User Manual (620-000160-230, April 2005)

2
2-108
McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual
Installation Tasks
Figure 2-87 Enter Network Password Dialog Box
c. Type the default user name and password.
NOTE: The default SANpilot interface user name is Administrator
and the default password is password. The user name and password
are case-sensitive.
d. Click OK. The SANpilot interface opens with the View panel
open and the Switch page displayed (Figure 2-88).
Figure 2-88 View Panel (Switch Page)