FW 07.00.00/HAFM SW 08.06.00 McDATA SANpilot User Manual (620-000160-230, April 2005)

2
2-120
McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual
Installation Tasks
2. At the Configure panel, click the Management tab. The Management
page displays with the SNMP tab selected (Figure 2-96 on
page 2-120).
a. Click the Enable SNMP Agent check box to enable or disable
the installed SNMP agent.
b. Select the appropriate Fibre Alliance management information
base (FA MIB) from the FA MIB Version drop-down list.
Available selections are:
• FA MIB Version 3.0.
• FA MIB Version 3.1.
c. Click the Enable Authentication Traps check box to enable or
disable transmission of SNMP trap messages to configured
recipients.
Figure 2-96 Configure Panel (Management Page with SNMP Tab)
d. For each trap recipient to be configured, type a community
name of 32 alphanumeric characters or less in the Community
Name field. The community name is incorporated in SNMP
trap messages to ensure against unauthorized viewing or use.