FW 07.00.00/HAFM SW 08.06.00 McDATA SANpilot User Manual (620-000160-230, April 2005)

Diagnostics
3-1
3
Diagnostics
This chapter describes diagnostic procedures used by service
representatives to isolate Sphereon 3032/3232 Switch problems or
failures to the field-replaceable unit (FRU) level. The chapter
specifically describes how to perform maintenance analysis
procedures (MAPs).
Maintenance Analysis Procedures
The MAPs provide fault isolation and related service procedures.
They are step-by-step procedures that prompt service personnel for
information and describe a maintenance action. The provide
information to interpret system events, isolate a switch failure to a
single FRU, remove and replace the failed FRU, and verify switch
operation.
Factory Defaults
Table 3-1 lists the defaults for the passwords, and IP, subnet, and
gateway addresses.
Table 3-1 Factory-Set Defaults
Item Default
Customer password password
Maintenance password level-2
IP address 10.1.1.10