FW 07.00.00/HAFM SW 08.06.00 McDATA SANpilot User Manual (620-000160-230, April 2005)

3
3-60
McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual
Diagnostics
Figure 3-26 Disconnect Verification Message Box
m. Click Yes. The following message box appears:
Figure 3-27 Save Session Device Verification Message Box
n. Click No to exit and close the HyperTerminal application.
o. Power off the maintenance terminal.
p. Disconnect the RS-232 modem cable from the switch and the
maintenance terminal. Replace the protective cap over the
maintenance port.
Continue.
23
Define the switch’s correct IP address to the EFC Server.
a. At the Product View, right-click the icon with the grey square
representing the switch reporting the problem. A pop-up menu
displays.
b. Select Modify. The Modify Network Address dialog box displays.
Figure 3-28 Modify Network Address Dialog Box