FW 07.00.00/HAFM SW 08.06.00 McDATA SANpilot User Manual (620-000160-230, April 2005)

Repair Information
4-1
4
Repair Information
This chapter describes the repair and repair-related procedures for
the Sphereon 3032/3232 Switch, and associated field-replaceable
units (FRUs). These procedures are described:
• Obtain log information.
• Display and use EFC Server views.
• Obtain and interpret port diagnostic and performance data, and
perform port diagnostic loopback tests.
• Swap ports (FICON Management Style only).
• Collect maintenance data.
• Clean fiber-optic components.
• Power the switch on and off.
• Perform an initial program load (IPL).
• Set the switch online or offline.
• Block or unblock Fibre Channel ports.
• Manage firmware versions.
• Manage configuration data.
• Install or upgrade software.
Do not perform repairs until a failure is isolated to a FRU. If fault
isolation was not performed, refer to MAP 0000: Start MAP on
page 3-6.