FW 07.00.00/HAFM SW 08.06.00 McDATA SANpilot User Manual (620-000160-230, April 2005)

2
2-52
McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual
Installation Tasks
Figure 2-52 Domain Information Dialog Box (IP Address Page)
3. Type a switch description (Sphereon 3216, for example) in
the Description field.
4. Type the switch IP address (determined by the customer’s
network administrator) in the IP Address field.
5. Type the switch subnet mask (determined by the customer’s
network administrator) in the Subnet Mask field.
6. At the Data Source for Domain area of the dialog box, select the Use
auto detection, Use the server, or Use a specific RDC radio button
(determined by the customer’s network administrator).
7. Click OK to save the entered information, close the dialog box,
and define the switch to the SAN management application.
8. Repeat step 2 through step 7 for each new switch.
9. Click OK to close the Discover Setup dialog box and return to the
SAN management application.