FW 07.00.00/HAFM SW 08.06.00 McDATA SANpilot User Manual (620-000160-230, April 2005)

2
Task 16: Configure PFE Key (Optional)
2-57
Installation Tasks
• Flexport Technology - A Flexport Technology switch is delivered
at a discount with only eight ports enabled. When additional port
capacity is required, the remaining ports are enabled (in
eight-port increments) through purchase of this feature.
• SANtegrity binding - This feature enhances security in SANs
with a large and mixed group of fabrics and attached devices.
• OpenTrunking - This feature provides dynamic load balancing of
Fibre Channel traffic across multiple ISLs.
Features are enabled through a PFE key that is encoded to work with
the serial number of a unique switch. A key is a case-sensitive
alphanumeric string with dashes every four characters.
To configure the PFE key:
1. Set the switch offline (Set the Switch Online or Offline on
page 4-45).
2. At the Hardware View for the selected switch, click the Configure
icon at the top of the view and select Features from the pop-up
menu. The Configure Feature Key dialog box displays.
Figure 2-55 Configure Feature Key Dialog Box
3. Click New. The New Feature Key dialog box displays.
Figure 2-56 New Feature Key Dialog Box