FW 07.00.00/HAFM SW 08.06.00 McDATA SANpilot User Manual (620-000160-230, April 2005)

3
MAP 0000: Start MAP
3-21
Diagnostics
38
Boot the web browser PC.
a. Power on the PC in accordance with the instructions delivered
with the PC. The Windows desktop appears.
b. Launch the PC browser application by double-clicking the
appropriate icon at the Windows desktop.
c. At the Netsite field (Netscape Navigator) or Address field
(Internet Explorer), type http://xxx.xxx.xxx.xxx, where
xxx.xxx.xxx.xxx is the IP address of the switch (obtained in
step 1). The Username and Password Required dialog box
appears.
Figure 3-7 Username and Password Required Dialog Box
d. Type the user name and password obtained in step 1, and click
OK. The SANpilot interface opens with the View panel (Switch
tab) displayed.
*Continue.