FW 07.00.00/HAFM SW 08.06.00 McDATA SANpilot User Manual (620-000160-230, April 2005)

8
McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual
Preface
The switch conforms with all protection requirements of EU
directive 89/336/EEC (EMC Directive) in accordance with of the
laws of the member countries relating to electromagnetic
compatibility (EMC), emissions, and immunity.
The switch conforms with all protection requirements of EU
directive 73/23/EEC (Low Voltage Directive) in accordance with
of the laws of the member countries relating to electrical safety.
The switch conforms with all protection requirements of EU
directive 93/68/EEC (Machinery Directive) in accordance with of
the laws of the member countries relating to safe electrical and
mechanical operation of the equipment.
McDATA does not accept responsibility for any failure to satisfy the
protection requirements of any of these directives resulting from a
non-recommended or non-authorized modification to the switch.
Warnings The following WARNING statements apply to certain information in
this publication, and describe safety practices that must be observed
while servicing the switch.
DANGER
To prevent electric shock, do not reach into nonvisible areas of a
switch connected to primary facility power.
DANGER
A McDATA-supplied power cord is provided for each switch power
supply. To prevent electric shock when connecting the switch to
primary facility power, use only the supplied power cords, and
ensure the facility power receptacle is the correct type, supplies the
required voltage, and is properly grounded.
Cautions The following CAUTION statements apply to certain information in
this publication, and describe safety practices that must be observed
while servicing the switch.