FW 07.00.00/HAFM SW 08.06.00 McDATA SANpilot User Manual (620-000160-230, April 2005)

3
MAP 0400: Loss of Console Communication
3-65
Diagnostics
Figure 3-31 Connect-To Dialog Box
g. Ensure the Connect using field displays COM1 or COM2
(depending on the serial communication port connection to the
switch), and click OK. The COMn dialog box displays (where n is
1 or 2).
Figure 3-32 COMn Dialog Box (COM1 or COM2)
h. Configure the Port Settings parameters as follows: