FW 07.00.00/HAFM SW 08.06.00 McDATA SANpilot User Manual (620-000160-230, April 2005)

3-66

McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual

Diagnostics

— Bits per second - 57600.

— Data bits - 8.

— Parity - None.

— Stop bits - 1.

— Flow control - Hardware.

When the parameters are set, click OK. The HyperTerminal

window displays.

i. At the C> prompt, type the user-level password (the default is

password) and press Enter. The password is case sensitive.

The HyperTerminal window displays with software and hardware

version information for the switch, and a C> prompt at the bottom

of the window.

j. At the C> prompt, type the displaylog command and press

Enter. The HyperTerminal window displays with the event log

(from switch NV-RAM) listed.

Figure 3-33 Hyperterminal Window - Event Log

k. If listed in the REAS column, record the event code 433.

l. Select Exit from the File pull-down menu to close the

HyperTerminal application. The following message box appears: