FW 07.00.00/HAFM SW 08.06.00 McDATA SANpilot User Manual (620-000160-230, April 2005)

3
3-100
McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual
Diagnostics
• Other characters are alphanumeric (a through z or 0 through
9), dollar sign ($), hyphen (-), caret (^), or underscore (_).
b. Close the Element Manager application for the switch (Hardware
View). The main EFC Manager window, or Product View (still
active) displays.
c. Select the Fabrics tab from the View menu. The Fabrics View
displays with the default Topology tab active.
d. Select the Zone Set tab at the bottom of the window. The Zone
Set tab becomes active and displays the active zone set.
Figure 3-47 Active Zone Set View
e. Inspect zone names in the active zone set to determine the
incompatible name.
f. Modify the incompatible zone name as directed by the customer:
1. At the navigation control panel, select Zone Sets from the
Configure menu. The Zone Sets dialog box displays.
2. Select (highlight) the active zone set name, then select
Modify from the Actions menu on the dialog box. The Modify
Zone Set dialog box displays.