FW 07.00.00/HAFM SW 08.06.00 McDATA SANpilot User Manual (620-000160-230, April 2005)

Install or Upgrade Software

4-61

Repair Information

h. When the process completes, click Close to close the dialog

box. The new software version executable file is downloaded

and saved to the EFC Server or PC hard drive.

i. If the executable file was downloaded to a PC (not the EFC

Server), transfer the firmware version file to the EFC Server by

diskette or other electronic means.

j. Go to step 5.

4. Insert the EFC Management Applications CD-ROM into the

CD-ROM drive of the service processor.

5. At the EFC Server, click the Windows Start button. The Windows

2000 Workstation menu displays.

6. At the Windows 2000 Workstation menu, select Run. The Run

dialog box appears.

7. At the Run dialog box, type D:\mcdataServerInstall in the

Open field.

8. Click OK. A series of message boxes appear as the InstallAnywhere

third-party application prepares to install the EFC Manager

software, followed by the McDATA EFC Management Applications

dialog box.