FW 07.00.00/HAFM SW 08.06.00 McDATA SANpilot User Manual (620-000160-230, April 2005)

B
B-72
McDATA® Sphereon 3032 and 3232 Installation and Service Manual
Event Code Tables
Event Code: 605
Message: SBAR module revision not supported
Severity: Minor
Explanation: The specified SBAR module is not recognized by the existing firmware. The SBAR module will appear uninstalled
to system software.
Action: Ensure that the switch model supports the operating firmware. If the firmware supports the model, perform the
data collection procedure for the switch using the EFC Manager. If the problem persists following a system
power-on reset, replace the switch and return the switch and the CD to McDATA for analysis and repair.
Event Data: Byte 0 = Slot position
Bytes 4-7 = Elapsed millisecond tick counter
Bytes 8-9: = Detected Module identifier
Distribution: Switch EFC Server Host
Nonvolatile
System
Event Log
System
Error
Indicator
Event Log E-Mail Call-Home Sense Info Link Incident
✔✔