FW 07.00.00/HAFM SW 08.06.00 McDATA SANpilot User Manual (620-000160-230, April 2005)

Using the Element Manager

1-37

General Information

The parameters of the call home notification feature are

configured through your SAN management application. For

more information, refer to your SAN management application

Software User Manual.

NOTE: The Call Home Notification feature may be optional, depending

on your purchased software package.

Backup & Restore Configuration

Select this option to save the product configuration stored on the

switch to the Management Server hard disk or to restore the

configuration data from the Management Server. Only a single

copy of the configuration is kept on the server.

This backup is primarily for single-CTP systems, where a backup

is needed to restore the configuration data to a replacement CTP

card. You cannot modify the location or the file name of the saved

configuration.

NOTE: You can only restore the configuration to a switch with the same

IP address.

CAUTION

The following operation resets all configuration including any

optional features that have been installed. You will need to re-enter

your feature key to enable all optional features after resetting the

configuration.

Reset Configuration

Select this option to reset all switch configuration data back to the

factory defaults. A confirmation dialog box displays with a

warning upon selecting the option.

Help Menu

Click the Help menu to display the following options.

Contents

Select this option to display the Help window. The Help window

contains Contents, Index, and Glossary buttons and hypertext-

linked items to help you quickly navigate through information.

Use the forward (>) and back (<) buttons to scroll forward and