FW 07.00.00/HAFM SW 08.06.00 McDATA SANpilot User Manual (620-000160-230, April 2005)

2
2-18
McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual
Installation Tasks
Figure 2-7 COMn (COM1 or COM2) Dialog Box
8. Configure the Port Settings parameters as follows:
— Bits per second - 57600.
— Data bits - 8.
— Parity - None.
— Stop bits - 1.
— Flow control - Hardware.
When the parameters are set, click OK. The HyperTerminal
window displays.
9. At the > prompt, type the user-level password (the default is
password) and press Enter. The password is case sensitive. The
HyperTerminal window displays with a C> prompt at the top of
the window.