HP StorageWorks Command Console V2.5 User Guide (AA-RV1UA-TE, March 2005)
Table Of Contents
- Contents
- About this Guide
- About SWCC
- Using Command Console
- Setting Up Notification
- Required Components for Notification
- Setting Up Pager Notification
- Using SWCC with a Third-Party Storage Management Program
- Using Event Logging on the Client System to Monitor Your Subsystem
- Interpreting Agent Email Messages
- About Event Information Fields
- Mapping State Change Digits to RAID System Components
- Table 11: State Change Digit Position and Corresponding RAID system Component
- The First Digit of the State Change Field (Overall RAID System)
- The Second Digit of the State Change Field (Disks)
- The Third Digit of the State Change Field (Power Supply)
- The Fourth Digit of the State Change Field (Fans)
- The Fifth Digit of the State Change Field (Battery)
- The Sixth Digit of the State Change Field (Temperature)
- The Seventh Digit of the State Change Field (This_Controller)
- The Eighth Digit of the State Change Field (Communications LUN)
- The Ninth Digit of the State Change Field (Other_Controller)
- The 10th Digit of the State Change Field (External Factors)
- The 11th Digit of the State Change Field (Logical Units)
- Using the Storage Window
- Why Use the Storage Window?
- Configuring a Controller
- Creating Virtual Disks
- Deleting Virtual Disks
- Modifying Virtual Disks
- Configuring the Operating System to Recognize Virtual Disk Changes
- Setting Passwords and Security Options (Network Only)
- Managing and Creating Spare Devices
- Using Configuration Files
- Understanding the Icons
- CLI Window
- Integrating SWCC with Insight Manager
- Troubleshooting
- Troubleshooting Connection Problems
- Invalid Network Port Numbers During Installation
- Network Port Assignments for UNIX-Client/Server Systems
- DHCP and WINS
- Connecting Via the Host SCSI Port
- “Access Denied” Message
- Adding New System by Using Internet Protocol Address May Cause Client to Stop Responding
- “No Agent Running” Message When Adding System to the Navigation Tree
- Troubleshooting the Client
- Authorization Error When Adding an Agent System
- Cannot Open Storage Window
- Client Hangs When LUN Is Deleted
- CLI RUN Commands
- Event Notification for Subsystems Connected to a Client System
- Invalid or Missing Fault Displays and Event Logs
- Pager Notification Continues After Exiting the Command Console Client
- Reconfiguration After Controller Replacement
- Some Graphics Do Not Scale Well with Large Fonts
- Starting Client from the Command Prompt
- Warning Message Windows
- Virtual Disk Recovery from a Configuration File
- Troubleshooting the HS-Series Agents
- Cluster Integration for the HS-Series Agents
- Troubleshooting Connection Problems
- Using the Command Console LUN
- Interpreting SNMP Traps
- Glossary
- Index
Index
146 Command Console V2.5 User Guide
parameters 68
properties 71
state 61
status 112
synchronization 101
conventions
document 12
equipment symbols 13
text symbols 12
critical event 46, 47, 48, 51
D
device
discovery process 71
failure 80
member 80
physical 72
states 83
status 21
document
conventions 12
related documentation 10
Domain Name Service (DNS) 91, 94
dual-redundant controller 107, 127
Dynamic Host Configuration Protocol (DHCP)
25
E
e-mail notification 21, 45, 57
equipment symbols 13
errors
invalid port numbers 91
event logging 45, 55, 69, 99
Event Notification 47, 52, 98
Event Viewer 21, 55, 99
F
Fabric Window 99
fan 48, 83
fault
battery 59
controller 48
disk fault 48
fan 61
pager codes 48
power supply 60
temperature 61
Fibre Channel
profile 70
firmware 68, 101
Fixed option 70, 110
Floating option 70, 110
G
getting help 16
graphics scaling error 100
H
help, obtaining 16
host system
accessing storageset 106
connecting to subsystem 31, 93
logins 71
name 40
pager notification 47, 52
ports 67, 70
SCSI port 93
HP
authorized reseller 16
storage web site 16
technical support 16
HSG60 Client 21, 34
HSG60 controller 19, 32
HSG80 Shim 87, 88
HS-Series Agent
cluster integration 102
connecting to network 34
connection to controller 26
e-mail notification feature 57
event logging 55
functionality 21
pager notification 25, 45