HP StorageWorks Command Console V2.5 User Guide (AA-RV1UA-TE, March 2005)
Table Of Contents
- Contents
- About this Guide
- About SWCC
- Using Command Console
- Setting Up Notification
- Required Components for Notification
- Setting Up Pager Notification
- Using SWCC with a Third-Party Storage Management Program
- Using Event Logging on the Client System to Monitor Your Subsystem
- Interpreting Agent Email Messages
- About Event Information Fields
- Mapping State Change Digits to RAID System Components
- Table 11: State Change Digit Position and Corresponding RAID system Component
- The First Digit of the State Change Field (Overall RAID System)
- The Second Digit of the State Change Field (Disks)
- The Third Digit of the State Change Field (Power Supply)
- The Fourth Digit of the State Change Field (Fans)
- The Fifth Digit of the State Change Field (Battery)
- The Sixth Digit of the State Change Field (Temperature)
- The Seventh Digit of the State Change Field (This_Controller)
- The Eighth Digit of the State Change Field (Communications LUN)
- The Ninth Digit of the State Change Field (Other_Controller)
- The 10th Digit of the State Change Field (External Factors)
- The 11th Digit of the State Change Field (Logical Units)
- Using the Storage Window
- Why Use the Storage Window?
- Configuring a Controller
- Creating Virtual Disks
- Deleting Virtual Disks
- Modifying Virtual Disks
- Configuring the Operating System to Recognize Virtual Disk Changes
- Setting Passwords and Security Options (Network Only)
- Managing and Creating Spare Devices
- Using Configuration Files
- Understanding the Icons
- CLI Window
- Integrating SWCC with Insight Manager
- Troubleshooting
- Troubleshooting Connection Problems
- Invalid Network Port Numbers During Installation
- Network Port Assignments for UNIX-Client/Server Systems
- DHCP and WINS
- Connecting Via the Host SCSI Port
- “Access Denied” Message
- Adding New System by Using Internet Protocol Address May Cause Client to Stop Responding
- “No Agent Running” Message When Adding System to the Navigation Tree
- Troubleshooting the Client
- Authorization Error When Adding an Agent System
- Cannot Open Storage Window
- Client Hangs When LUN Is Deleted
- CLI RUN Commands
- Event Notification for Subsystems Connected to a Client System
- Invalid or Missing Fault Displays and Event Logs
- Pager Notification Continues After Exiting the Command Console Client
- Reconfiguration After Controller Replacement
- Some Graphics Do Not Scale Well with Large Fonts
- Starting Client from the Command Prompt
- Warning Message Windows
- Virtual Disk Recovery from a Configuration File
- Troubleshooting the HS-Series Agents
- Cluster Integration for the HS-Series Agents
- Troubleshooting Connection Problems
- Using the Command Console LUN
- Interpreting SNMP Traps
- Glossary
- Index
Index
Command Console V2.5 User Guide 147
password 79
storage list mismatch 100
troubleshooting 101
HS-Series controller 34
I
icons
controller 68
failed device 80
host 40
Insight Agent 90
legends for 83
Navigation Tree 41
Navigation Window 41
Storage Window 40
virtual disk 76
integration patch
installing 88
removing 90
Solution Software CD-ROM 88
Internet 26
J
Just a Bunch of Disks (JBOD) 72
L
Local Area Network (LAN) 26
LUN
address 71
alias 69
Cautions 110
deleting Command Console 98
disabling Command Console 107, 108
enabling Command Console 107
fault 48
location on controller 106
properties 70
reserved addresses 106
status 67, 112
virtual disk state 115
M
Management Information Base (MIB) 54, 112
metadata 81, 101
mirrored device group (RAID 1) 67
My Enterprise
pager notification 52
N
Navigation Tree 25
Compaq Insight Manager 89
example 39
icons 41
no agent running message 96
storage status 39, 41
Navigation Window 21, 39
network
connection 26, 34, 91
errors 91
network connection 31
HS-Series controller 34
Network Information Services (NIS) 92
network security 79
notification
components 45
options 45
setting up list for pager 51
notification list 52
P
pager
alphanumeric 49, 50
client list 46
numeric 48, 51
Pager Identification Number (PIN) 47, 48
pager notification
Agent 25, 45
alphanumeric pager 46, 50
Command Console Client 21
critical event 47
default codes 47
error 99