HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide (EK-G80TS-SA. C01, March 2005)

Instance Codes
210 HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide
43010064 The host port protocol component detected that the
“other controller” failed and that “this controller” has
taken over the units specified in the extended sense
data.
04 00
43020064 The host port protocol component detected that “this
controller” has taken over (failed back) the units
specified in the extended sense data.
04 00
43036A64 The host connection table has reached its maximum
host connections. No new connections can be added
until the host table is cleared of
stale entries (inactive
connections still listed on the connection table)
or
some host entries are deleted
A0 6A
82042002 A spurious interrupt was detected during the
execution of a subsystem built-in self-test.
13 20
82052002 An unrecoverable error was detected during
execution of the host port subsystem test. The system
cannot communicate with the host.
13 20
82062002 An unrecoverable error was detected during
execution of the UART and DUART subsystem test.
This condition renders the console unusable and
causes failover communications failure.
13 20
82072002 An unrecoverable error was detected during
execution of the FX subsystem test.
13 20
820A2002 An unrecoverable error was detected during
execution of the PCI9060ES test.
13 20
820B2002 An unrecoverable error was detected during
execution of the device port subsystem built-in
self-test. One or more of the device ports on the
controller module has failed; some or all of the
attached storage is no longer accessible on “this
controller.”
13 20
Table 53: Instance Codes and Repair Action Codes (Sheet 30 of 30)
Instance
Code
Description Template
Repair
Action
Code