HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide (EK-G80TS-SA. C01, March 2005)

Last Failure Codes
221HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide
01932588
01942088
An error has occurred on the Cache Data and Address Line (CDAL):
Last failure parameter [0] contains the value of read diagnostic register 0.
Last failure parameter [1] contains the value of read diagnostic register 1.
Last failure parameter [2] contains the value of write diagnostic register 0.
Last failure parameter [3] contains the value of write diagnostic register 1.
Last failure parameter [4] contains the IBUS address of the error register.
Last failure parameter [5] contains the PCFX CDAL control and status
register.
Last failure parameter [6] contains the previous CDAL address of the error
register.
Last failure parameter [7] contains the current CDAL address of the error
register.
Changes to PDAL.
25
20
01950188 An error has occurred that caused the FX to be reset, if not permissible:
Last failure parameter [0] contains the value of read diagnostic register 0.
Last failure parameter [1] contains the value of read diagnostic register 1.
Last failure parameter [2] contains the value of write diagnostic register 0.
Last failure parameter [3] contains the value of write diagnostic register 1.
Last failure parameter [4] contains the IBUS address of the error register.
Last failure parameter [5] contains the PCFX PDAL control and status
register.
Last failure parameter [6] contains the PCFX CDAL control and status
register.
Last failure parameter [7] contains the current PDAL address of the error
register.
01
Table 56: Last Failure Codes and Repair Action Codes (Sheet 8 of 55)
Last
Failure
Code
Description
Repair
Action
Code