HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide (EK-G80TS-SA. C01, March 2005)

Last Failure Codes
227HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide
02A90100 Too many pending FOC$SEND requests by the Cache Manager. Code is
not designed to handle more than one FOC$SEND pending because
there is no reason to expect more than one pending.
01
02AA0100 An invalid call was made to CACHE$DEALLOCATE_CLD. Either that
device had dirty data, or it was bound to a RAIDset.
01
02AB0100 An invalid call was made to CACHE$DEALLOCATE_SLD. A RAIDset
member either had dirty data or writeback already turned on.
01
02AC0100 An invalid call was made to CACHE$DEALLOCATE_SLD. The RAIDset
still has data (strip nodes).
01
02AE0100 The mirrorset member count and individual member states are
inconsistent. Discovered during a mirrorset write or erase.
01
02AF0102 An invalid status was returned from VA$XFER( ) in a write operation:
Last failure parameter [0] contains the DD address.
Last failure parameter [1] contains the invalid status.
01
02B00102 An invalid status was returned from VA$XFER() in an erase operation:
Last failure parameter[0] contains the DD address.
Last Failure Parameter[1] contains the invalid status.
01
02B10100 A mirrorset read operation was received and the round robin selection
algorithm found no Normal members in the mirrorset. Internal
inconsistency.
01
02B20102 An invalid status was returned from CACHE$LOCK_READ during a
mirror copy operation:
Last failure parameter [0] contains the DD address.
Last failure parameter [1] contains the invalid status.
01
02B30100 CACHE$CHANGE_MIRROR_MODE invoked illegally (cache bad, dirty
data still resident in the cache.)
01
02B90100 Invalid code loop count attempting to find the cache ID blocks. 01
02BD0100 A mirrorset metadata online operation found no Normal members in the
mirrorset. Internal inconsistency.
01
Table 56: Last Failure Codes and Repair Action Codes (Sheet 14 of 55)
Last
Failure
Code
Description
Repair
Action
Code